Italy

Aperam Stainless Services & Solutions Italy commercialises stainless steel flat products through a network that includes two service centres and agencies in Rome and Vicenza. As an integrated part of Services & Solutions division, we can provide our customers with a wide range of grades, dimensions and finishes, both in sheets and coils. Through our agencies, we also serve foreign markets to ensure that all of our customers – regardless of where they are located – get the sizes and products they need. This service has proved popular with our Italian customers who have expanded their operations abroad. Thanks to our wide range of products, two service centres and an efficient sales network – all backed by a qualified technical assistance team – we are positioned to satisfy all customer and market needs.

Massalengo

Aperam Stainless Services & Solutions Italy
Località Priora, 4
26815 Massalengo (LO)
T: +39 0371 49041
E: info.italy@aperam.com

Our Massalengo Service Center, Lodi (LO) transforms products with thickness from 0.4 up to 14mm and up to 2000 mm width, with a total capacity of over 110,000 tons/year.

Podenzano

Aperam Stainless Services & Solutions Italy
Via F. Santi, 2/4
29027 Podenzano (PC)
T: +39 0523 554 501
E: info.italy@aperam.com

Our Podenzano Service Center, Piacenza (PC) transforms products with thickness from 0.3 up to 4mm and from 5 up to 1520 mm width, with a total capacity of over 45/50kton/year.

Alexia Pasquino Commercial Director		South Center Giuseppe Orrù Area Manager
North East Gianluca Nogarin Area Manager

North West

Paolo Gualtieri
Area Manager

Podenzano

Giuseppe Losi
Non Prime & Strips

Grades

Massalengo

Grade designations	Standards			Chemical Compositions							Mechanical properties
	AISI	UNS	EN	C	Si	Mn	Cr	Mo	Ni	Others	R_m	R_p0.2	A%
Aperam 304 (18-9E)	304	S30400	1.4301	0.050	0.40	1.10	18.20		8.05		630	310	54
Aperam 304D (18-9ED)	304	S30400	1.4301	0.040	0.40	1.20	18.20		8.10		630	280	58
Aperam 304L (18-9L)	304L	S30403	1.4307	0.025	0.40	1.40	18.20		8.05		630	310	54
Aperam 305 (18-12D)	305	S30500	1.4303	0.025	0.40	1.30	18.50		12.60		560	260	50
Aperam 316L (18-11ML)	316L	S31603	1.4404	0.025	0.40	1.20	18.20	2.10	10.10		610	300	52
Aperam 316T (17-11MT)	316Ti	S31635	1.4571	0.035	0.40	1.20	16.80	2.10	10.70	Ti=0.350	600	290	50
Aperam 321 (18-10T)	321	S32100	1.4541	0.025	0.40	1.10	17.15		9.10	Ti=0.30	620	290	52
K03		S41003	1.4003	0.020	0.50	0.60	11.00		0.40		500	350	27
K09	409	S40900	1.4512	0.010	0.45	0.30	11.30			Ti=0.190	440	260	33
K30	430	S43000	1.4016	0.040	0.35	0.30	16.50				500	330	27
K30ED	430	S43000	1.4016	0.015	0.35	0.40	16.50				460	300	31
K33X			1.4513	0.015	0.50	0.25	17.30	0.90		N=0.015, Ti=0.35	470	300	31
K36	436	S43600	1.4526	0.020	0.40	0.25	17.50	1.25		Nb=0.50	510	350	30
K39	439	S43035	1.4510	0.020	0.40	0.30	17.50			Ti=0.35	460	310	32
K39M	430Ti	S43036	1.4510	0.020	0.40	0.30	16.50			Ti=0.40	460	300	30
K41	441 ⁽¹⁾	S43932/S43940	1.4509	0.015	0.60	0.30	17.80			Ti+Nb=0.65	490	320	30
K41X	441 ⁽¹⁾	S43932	1.4509	0.015	0.60	0.30	17.80			N=0.015, Ti+Nb=0.65	490	320	30
K44	444	S44400	1.4521	0.015	0.50	0.30	17.70	1.85		Ti+Nb=0.45	530	370	28
K45	445 ⁽¹⁾	S44500	1.4621	0.015	0.25	0.25	20.20			Nb=0.45, Cu=0.45	490	340	31
DX2205	22-05	S32205	1.4462	0.020	0.30	1.80	22.80	3.10	5.50	N=0.17	830	620	29
MA2			1.4021	0.22	0.35	0.35	13.30				580	340	25
MA3	420	S42000	1.4028	0.32	0.35	0.30	13.70				610	330	24

(1) Common designation

Searching for other grades, please consult:

See Mill Offer See grade datasheets

Podenzano

Grade designations	Standards			Chemical Compositions							Mechanical properties
	AISI	UNS	EN	C	Si	Mn	Cr	Mo	Ni	Others	R_m	R_p0.2	A%
Aperam 304 (18-9E)	304	S30400	1.4301	0.050	0.40	1.10	18.20		8.05		630	310	54
Aperam 304D (18-9ED)	304	S30400	1.4301	0.040	0.40	1.20	18.20		8.10		630	280	58
Aperam 304L (18-9L)	304L	S30403	1.4307	0.025	0.40	1.40	18.20		8.05		630	310	54
Aperam 305 (18-12D)	305	S30500	1.4303	0.025	0.40	1.30	18.50		12.60		560	260	50
Aperam 316L (18-11ML)	316L	S31603	1.4404	0.025	0.40	1.20	18.20	2.10	10.10		610	300	52
Aperam 316T (17-11MT)	316Ti	S31635	1.4571	0.035	0.40	1.20	16.80	2.10	10.70	Ti=0.350	600	290	50
Aperam 321 (18-10T)	321	S32100	1.4541	0.025	0.40	1.10	17.15		9.10	Ti=0.30	620	290	52
K03		S41003	1.4003	0.020	0.50	0.60	11.00		0.40		500	350	27
K09	409	S40900	1.4512	0.010	0.45	0.30	11.30			Ti=0.190	440	260	33
K30	430	S43000	1.4016	0.040	0.35	0.30	16.50				500	330	27
K30ED	430	S43000	1.4016	0.015	0.35	0.40	16.50				460	300	31
K33X			1.4513	0.015	0.50	0.25	17.30	0.90		N=0.015, Ti=0.35	470	300	31
K36	436	S43600	1.4526	0.020	0.40	0.25	17.50	1.25		Nb=0.50	510	350	30
K39	439	S43035	1.4510	0.020	0.40	0.30	17.50			Ti=0.35	460	310	32
K39M	430Ti	S43036	1.4510	0.020	0.40	0.30	16.50			Ti=0.40	460	300	30
K41	441 ⁽¹⁾	S43932/S43940	1.4509	0.015	0.60	0.30	17.80			Ti+Nb=0.65	490	320	30
K41X	441 ⁽¹⁾	S43932	1.4509	0.015	0.60	0.30	17.80			N=0.015, Ti+Nb=0.65	490	320	30
K44	444	S44400	1.4521	0.015	0.50	0.30	17.70	1.85		Ti+Nb=0.45	530	370	28
K45	445 ⁽¹⁾	S44500	1.4621	0.015	0.25	0.25	20.20			Nb=0.45, Cu=0.45	490	340	31
DX2205	22-05	S32205	1.4462	0.020	0.30	1.80	22.80	3.10	5.50	N=0.17	830	620	29

(1) Common designation

Searching for other grades, please consult:

See Complete Offer See grade datasheets

Dimensions

Massalengo

Strip - Coil

	CR	HR
Thickness (mm)	0.4 - 8	2.0 - 14
Width Vertical Axis	50 - 700	50 - 700
Width Horizontal Axis	50 - 2000	500 - 2000
Outer Diameter	780 - 1450	780 - 1450
Internal Diameter	508 - 610	508 - 610
Max Coil Weight	20t	20t
Interleaving paper *	Yes	Yes
Marking *	Yes	Yes

* If required by the customer

Sheets - Plates

	CR	HR
Thickness (mm)	0.4 - 8	2.0 - 14
Finish	2B / 2R / 2E / polished	1D
Width	90 - 2000	300 - 2000
Length	300 - 13000	500 - 14000
Interleaving paper *	Yes	Yes
Marking *	Yes	Yes

* If required by the customer

Searching for other dimensions and forms, please consult:

See Mill Offer

Podenzano

Strip - Coil

	CR	HR
Thickness (mm)	0.3 - 3.0	2.0 - 3.0
Width Vertical Axis	5 - 700	100 - 700
Width Horizontal Axis	700 - 1520	700 - 1520
Outer Diameter	780 - 1800	780 - 1800
Internal Diameter	400 - 508 - 610	508 - 610
Max Coil Weight	20t	20t
Interleaving paper *	Yes	Yes
Marking *	Yes	Yes

* If required by the customer

Sheets - Plates

	CR	HR
Thickness (mm)	0.4 - 2.5	2.0 - 3.0
Finish	2B / 2R / 2E / polished	1D
Width	80 - 650	100 - 1500
Length	200 - 2500	200 - 2500
Interleaving paper *	Yes	Yes
Marking *	Yes	Yes

* If required by the customer

Searching for other dimensions and forms, please consult:

See Complete Offer

Surface aspects

Massalengo

Condition	Designation	Description	ASTM	EN10088
HR	HRAP	Hot-rolled, annealed and pickled	N°1	1D
CR annealed	HRC	Cold-rolled, rough, matt		2E
	2D	Cold-rolled, annealed and pickled, not skinpassed	2D	2D
	2B	Cold-rolled, annealed, pickled and skinpassed	2B	2B
	2R	Cold-rolled, bright annealed and skinpassed	BA	2R
CR work hardened	Work hardened (1)	Cold-rolled without subsequent anneal for various hardness levels	TR	2H
CR annealed	N°3 / P80D	N°3 polished / Dry polished with 80-grit abrasive belts	N°3	2G
	N°4 / P120D-P150D	N°4 polished / Dry polished with 120/150 grit abrasive belts	N°4	2G
	N°5 / P180D-P220D	N°5 polished / Dry polished with 180/220 grit abrasive belts		2G
	N°6 / P240D	N°6 polished / Dry polished with 240-grit abrasive belts		2G
	N°7 / P320D	N°7 polished / Dry polished with 320-grit abrasive belts		2G
	P400D	Dry polished with 400-grit abrasive belts		2G
	Duplo P220	Dry polished with 220-grit abrasive belts + brushed with wire rolls		2G
	Duplo P320	Dry polished with 320-grit abrasive belts + brushed with wire rolls		2G
	Scotch Brite	Lightly brushed with wire rolls		2J

(1) Special finishes possible, consult us

Podenzano

Condition	Designation	Description	ASTM	EN10088
HR	HRAP	Hot-rolled, annealed and pickled	N°1	1D
CR annealed	HRC	Cold-rolled, rough, matt		2E
	2D	Cold-rolled, annealed and pickled, not skinpassed	2D	2D
	2B	Cold-rolled, annealed, pickled and skinpassed	2B	2B
	2R	Cold-rolled, bright annealed and skinpassed	BA	2R

Searching for other finishes, please consult:

See Complete Offer

Certifications

Aperam Stainless Services & Solutions Italy S.r.l. supports and carries on the Aperam principles in term of Quality, Security and Environment, and is aiming at reducing risks associated with Health, Security and Environment for its employees, customers and stakeholders.

The agreement of those principles is guaranteed by the fully certified through integrated quality system that responds to the requirements of the norms UNI EN ISO 9001, OHSAS 18001 and ISO 14001.

Certificate ISO 9001: 2015

Issued by DNV - GL
Date of grant: 07 November 2018
Expiration date: 07 November 2021
Download

Certificate ISO 14001: 2015

Issued by DNV - GL
Date of grant: 05 January 2017
Expiration date: 05 January 2020
Download

Certificate OHSAS 18001: 2007

Issued by DNV - GL
Date of grant: 18 January 2017
Expiration date: 21 December 2019
Download

Brochure

Download IT version
Download EN version

Find Your Contact

Italy

Italy

Massalengo

Podenzano

South Center

North East

North West

Podenzano

Massalengo

Grade designations

Standards

Chemical Compositions

Mechanical properties

Podenzano

Grade designations

Standards

Chemical Compositions

Mechanical properties

Massalengo

Strip - Coil

CR

HR

Sheets - Plates

CR

HR

Podenzano

Strip - Coil

CR

HR

Sheets - Plates

CR

HR

Massalengo

Condition

Designation

Description

ASTM

EN10088

Podenzano

Condition

Designation

Description

ASTM

EN10088