Aperam Stainless Services and Solutions France consist of two entities. Our Isbergues Service Centre in northern France distributes a wide range of steel grades and products, while our Lusignan Centre specialises in polished and coloured finishes. Both are staffed by a team dedicated to providing you the very best products backed by the technical support you need for all your projects. Thanks to our slitting, cut-to-length and polishing tools, we can deliver a range of flat stainless steel products tailored to our customers operating in the chemical, oil, food, construction, heat, construction, automotive and household appliances sectors – to name only a few.

Locations

Aperam Stainless Services & Solutions France
Rue Pierre Loti, BP53
62330 Isbergues
T: +33 3 21 63 58 00
E: france.service@aperam.com

Special finishes & Coloured products
5, rue de la Roche Grolleau, BP 40020
86600 Lusignan
T: +33 5 49 89 30 77
E:  france.service@aperam.com

France

Philippe Piers
Commercial Director
contact
Building

Joëlle Pontet
Sales Manager
contact
Special Finishes

Sebastien Fayoux
Sales
contact

North of France

Nicolas Penne
Sales
Nicolas Penne 80x80 2
West of France

Anita Charpentier
Sales
contact
East of France

Didier Perin
Sales
Didier Perin 80x80
Grades
Grade designations
Standards
Chemical Compositions
Mechanical properties
 AISIUNSENCSiMnCrMoNiOthersRmRp0.2A%
Aperam 304 (18-9E)304S304001.43010.0500.401.1018.20 8.05 63031054
Aperam 304L (18-9L)304LS304031.43070.0250.401.4018.20 8.05 63031054
Aperam 316L (18-11ML)316LS316031.44040.0250.401.2018.202.1010.10 61030052
K30430S430001.40160.0400.350.3016.50   50033027
K36436S436001.45260.0200.400.2517.51.25 Nb=0.5051035030
K41441 (1)S43932/S439401.45090.0150.600.3017.80  Ti+Nb=0.6549032030
K44444S444001.45210.0150.50.317.701.85 Ti+Nb=0.4553037028
K45445 (1)S445001.46210.0150.250.2520.20  Nb=0.45, Cu=0.4549034031
DX22052205S322051.44620.0200.301.8022.803.105.50N=0.1783062029
MA2  1.40210.220.350.3513.30   58034025
MA3420S420001.40280.320.350.3013.70   61033024
MA3M  1.44190.380.300.3014.000.80  68040021
MA4  1.40340.460.400.3013.80   67039021
MA5   0.350.300.3016.00  N=0.1568039021
(1) Common designation 
Searching for other grades, please consult: 
See Complete Offer See grade datasheets 

 

Dimensions

Strip - Coil

Finish
Thickness in mm
Min Width in mm
Max Width in mm
2B0.4 ≤ t < 0.8 151250
0.8 ≤ t <1151500
1 ≤ t < 8.0152000
2R0.4 ≤ t < 0.8 151250
0.8 ≤ t <1151500
1 ≤ t < 2.0152000
HRAP3.0 ≤ t < 13502000

Sheets - Plates

Finish
Thickness (mm)
Min Width (mm)
Max Width (mm)
Min Length (mm)
Max Length (mm)
2B0.4 ≤ t < 0.829012505003000
0.8 ≤ t <1290150050015000
1 ≤ t < 2.5290200050015000
2R0.4 ≤ t < 0.629012505003000
0.8 ≤ t <2290150050015000
1 ≤ t < 2.5290200050015000
HRAP2.5 ≤ t < 4290200050015000
4 ≤ t < 13600200060015000

Searching for other dimensions and forms, please consult:

See Complete Offer

Surface aspects
Condition
Designation
Description
ASTM
EN10088
Thickness (mm)
Max Width (mm)
HRHRAPHot-rolled, annealed and pickledN°11D  
HRDIN embossedHot-rolled with embossed DIN tear-plate pattern, annealed and pickled 1M  
CR annealedHRCCold-rolled, rough, matt 2E  
CR annealed2DCold-rolled, annealed and pickled, not skinpassed2D2D  
CR annealed2BCold-rolled, annealed, pickled and skinpassed2B2B  
CR annealed2RCold-rolled, bright annealed and skinpassedBA2R  
CR annealedN°3 / P80DN°3 polished / Dry polished with 80-grit abrasive belts N°32G0.8 - 3≤ 1500
CR annealedN°4 / P120D-P150DN°4 polished / Dry polished with 120 grit abrasive belts N°42G0.6 - 3≤ 1500
CR annealedN°5 / P180D-P220DN°5 polished / Dry polished with 220 grit abrasive belts  2G0.6 - 3≤ 1500 
CR annealedN°7 / P320DN°7 polished / Dry polished with 320-grit abrasive belts  2G0.6 - 3≤ 1500 
CR annealedP400DDry polished with 400-grit abrasive belts 2G0.6 - 3≤ 1500
CR annealedDuplo P220Dry polished with 220-grit abrasive belts + brushed with wire rolls 2G0.6 - 3≤ 1500
CR annealedDuplo P320Dry polished with 320-grit abrasive belts + brushed with wire rolls 2G0.6 - 3≤ 1500
CR annealedScotch BriteLightly brushed with wire rolls 2J0.6 - 3≤ 1500
CR annealedUginox PatinaSurface coated with a continuous layer of tin in accordance with standard NFA 36332 2S0.4 - 0.5≤ 1250
CR annealedUginox TopMatt low-reflectance finish obtained by cold rolling with special rolls2D2F0.4 - 1≤ 1250
CR annealedUginox Bright2R finish for construction industryBA2R0.8 - 2≤ 1250
CR annealedUginox Mat2B finish for construction industry2B2B0.8 - 2≤ 1250
CR Work HardenedUginox LeatherEtched textured finish obtained by cold rolling with special rolls 2M0.8 - 2≤ 1250
CR annealedUginox LinenEtched linen finish obtained by cold rolling with special rolls, followed by a final anneal 2M0.8 - 2≤ 1250
CR annealedUginox SquaresEtched chequer patterned finish obtained by cold rolling with special rolls, followed by a final anneal 2M0.8 - 2≤ 1250
CR annealedMirror Polish Méca 7DDirectional nr 7 mirror polishing.The surface is perfectly reflective, the reflected image is sharpBA2P0.5 - 10≤ 2000
CR annealedMirror Polish Méca 8NDUndirectional nr 8 mirror polishing (super mirror) without any track of polishingBA2P0.5 - 10≤ 1500

Searching for other surface finishes, please consult:

See Complete Offer

Certifications

Our Integrated Management System of Quality, Health & Safety, Environnement and Energy is certified according to the following standards :

ISO 9001

Certificate ISO 9001: 2015

  • Issued by Afnor
  • Date of grant: 18 May 2016
  • Expiration date: 18 May 2019
  • Download
ISO 50001 Fr

Certificate ISO 50001: 2011

  • Issued by: Afnor
  • Date of grant: 07 April 2016
  • Expiration date: 07 April 2019
  • Download
ISO 14001 FR

Certificate ISO 14001: 2015

  • Issued by Afnor
  • Date of grant: 18 May 2016
  • Expiration date: 18 May 2019
  • Download 
OHSAS 18001

Certificate OHSAS 18001: 2007

  • Issued by: Afnor
  • Date of grant: 18 May 2016
  • Expiration date: 18 May 2019
  • Download

Other Topics

Stainless Flat Local Offer

Subscribe to Stainless Flat Local Offer