Stainless Flat Offer

Aperam Stainless Services & Solutions Czech Republic
Sleská 13
120 00 Praha 2
T: +420 221 001 602
E: nerezovaocel@aperam.com

Aperam Stainless Services & Solutions CZ s.r.o. je výhradnou obchodnou a marketingovou kanceláriou (zastúpením) v Českej a Slovenskej republike pre všetky produkty Aperam Group z nerezovej ocele. V našej pražskej kancelárii ponúkame celú škálu plochých produktov ako sú plechy, zvitky, disky, presné pásy a ploché tyče. Môžeme taktiež ponúknuť zákazkové riešenia pre také segmenty ako spotrebný tovar, biela spotrebná technika, automobilizmus, všeobecný a spracovateľský priemysel a stavebníctvo a konštrukcia.

Contacts filtered

Contact

Slovakia

Nada Pisova

Sales Representative

Contact

Czech Republic

Jan Provaznik

Sales Manager

Contact

Czech Republic

Tomáš Václavík

Sales Manager

Grades

Grade designations	Standards			Chemical Compositions							Mechanical properties
	AISI	UNS	EN	C	Si	Mn	Cr	Mo	Ni	Others	R_m	R_p0.2	A%
Aperam 304 (18-9E)	304	S30400	1.4301	0.050	0.40	1.10	18.20		8.05		630	310	54
Aperam 304ED (18-9DDQ)	304	S30400	1.4301	0.045	0.40	1.10	18.20		9.10		610	270	57
Aperam 304L (18-9L)	304L	S30403	1.4307	0.025	0.40	1.40	18.20		8.05		630	310	54
Aperam 316L (18-11ML)	316L	S31603	1.4404	0.025	0.40	1.20	18.20	2.10	10.10		610	300	52
Aperam 321 (18-10T)	321	S32100	1.4541	0.025	0.40	1.10	17.15		9.10	Ti=0.30	620	290	52
K09X	409	S40900	1.4512	0.010	0.45	0.30	11.30			Ti=0.190, N=0.010=0.190>	440	260	33
K30	430	S43000	1.4016	0.040	0.35	0.30	16.50				500	330	27
K39M	430Ti	S43036	1.4510	0.020	0.40	0.3	16.50			Ti=0.40	460	300	30
K41	441 ⁽¹⁾	S43932/S43940	1.4509	0.015	0.60	0.30	17.80			Ti+Nb=0.65	490	320	30
K41X	441 ⁽¹⁾	S43932	1.4509	0.015	0.60	0.30	17.80			N=0.015, Ti+Nb=0.65	490	320	30
K44	444	S44400	1.4521	0.015	0.50	0.30	17.70	1.85		Ti+Nb=0.45	530	370	28
Aperam 309 (R20-12)			1.4828	0.050	1.60	1.35	19.30		11.40		630	290	54
DX2205	22-05	S32205	1.4462	0.020	0.30	1.80	22.80	3.10	5.50	N=0.17	830	620	29

(1) Common designation

Searching for other grades, please consult:

See Complete Offer See grade datasheets

Dimensions

	Slitting Line	Blanking Line	Polishing Line	Cutting Line	Cutting Line 2
Thickness (mm)	0.3 - 0.4	0.4 - 3.0	0.8 - 3.0	0.4 - 3.5	2.0 - 15.0
Width (mm)	28 - 1650	100 - 600	400 - 1500	400 - 1600	500 - 2100
Length (mm)		300 - 6000	1000 - 4000	400 - 8000	500 - 14000
Capacity (t)	Max 60 / shift	Max 10 / shift	Max 7.5 / shift	Max 50 / shift	Max 50 / shift
Finish	Foil, paper	Foil, paper	Foil	Foil, paper	Foil, paper

Searching for other dimensions and forms, please consult:

See Complete Offer

Surface aspects

Condition	Designation	Description	ASTM	EN10088
HR	HRAP	Hot-rolled, annealed and pickled	N°1	1D
HR	DIN embossed	Hot-rolled with embossed DIN tear-plate pattern, annealed and pickled		1M
CR annealed	HRC	Cold-rolled, rough, matt		2E
	2D	Cold-rolled, annealed and pickled, not skinpassed	2D	2D
	2B	Cold-rolled, annealed, pickled and skinpassed	2B	2B
	2R	Cold-rolled, bright annealed and skinpassed	BA	2R
	N°6 / P240D	N°6 polished / Dry polished with 240-grit abrasive belts		2G
	N°7 / P320D	N°7 polished / Dry polished with 320-grit abrasive belts		2G
	Scotch Brite	Lightly brushed with wire rolls		2J
	Uginox Patina	Surface coated with a continuous layer of tin in accordance with standard NFA 36332		2S
	Uginox Top	Matt low-reflectance finish obtained by cold rolling with special rolls	2D	2F
CR work hardened	Uginox Leather	Etched textured finish obtained by cold rolling with special rolls		2M
CR annealed	Uginox Linen	Etched linen finish obtained by cold rolling with special rolls, followed by a final anneal		2M

Searching for other surface finishes, please consult:

See Complete Offer

Certifications

Aperam Stainless Services & Solutions Poland holds the Management System Certificates ISO 9001, ISO 14001, BS OHSAS 18001 and SA 8000 for Quality, Environment, Occupational Health and Safety and Social Accountability granted by DEKRA and TÜV Rheinland certification units.

	Certificate ISO 9001:2015 Issued by Dekra Date of grant: 09 February 2018 Expiration date: 08 February 2021 Download		Certificate IATF 16949:2016 Issued by: Dekra Date of grant: 09 February 2018 Expiration date: 08 February 2021 Download
	Certificate ISO 14001:2015 Issued by Dekra Date of grant: 30 December 2017 Expiration date: 29 December 2020 Download		Integrated Management System Policy Date of issue: 01 February 2017 Download
	Certificate OHSAS 18001:2007 Issued by Dekra Date of grant: 30 December 2017 Expiration date: 29 December 2020 Download		Social Accountability Policy Date of issue: 01 February 2017 Download
	Certificate SA 8000:2014 Issued by: TÜV Rheinland Date of grant: 16 may 2017 Expiration date: 10 may 2020 Download		Code of Conduct of Social Accountability for Suppliers Date of issue: 01 February 2017 Download