Search Results

IMPHY 800 is a Nickel Chromium Iron alloy used when resistance to oxidation, carburization and other type of high temperature corrosion is needed. IMPHY 800 presents a good corrosion resistance to many aqueous media and a good resistance to stress...
IMPHY 800 H – HC, a Nickel Chromium Iron alloy (Ti+Al) is used when greater resistance to stress rupture and creep, especially for T > 816°C is required.
RESISTOHM 80 gives extraordinary performances at temperatures up to 1200°C and will be operational at those high temperatures under the most exacting conditions.    
This is an excellent choice for heating elements operating at a temperature up to 1100°C.
Its high temperature coefficient allows it a speeder rise in temperature than the other NiCr.
Its high chromium percentage (30%) gives RESISTOHM 70 a very good life time in the furnace applications. Elements in RESISTOHM 70 have also a satisfactory life time when operating atmosphere is alternatively oxidizing and reducting.
This thermocouple has the highest EMF output per degree of all the referenced thermocouples.
IMPHY NiCu28 is used for welding of copper-alloys IMPHY NiCu32 or IMPHY NiCu28Al, dissimilar welding between copper-alloys to nickel 200, or surfacing of steels. Similar to Copper-Nickel alloy IMPHY NiCu32: – Very good strength corrosion res...
Type J Thermocouple is frequently used for its low cost and high EMF It can be used in oxidizing conditions up to 760°C. For higher temperatures, it is recommended to use large wire diameters.
Type K is the most commonly used thermocouple for measuring high temperatures, providing the widest operating temperature range from – 200 ° to + 1260 °C.    
Type N thermocouple has been developed with silicon content content which provides much longer life, longer exposure to high temperature and better reliability of EMF drift and short term EMF changes.
A 3 layer combination for PMCB, MCCB, Contactors, and other switchgear products.
A 3 layer combination for Copper/Stainless Steel/Nickel
A 3 layer combination for Fuses/ switchgear.
A 3 layer combination for bus bars.
Zweischichtwerkstoff für Sammelschienen  
Bimetals of the R series have the same physical properties as the AS series; however, the active member is harder. Their thermal deflection is highly stable.
Bimetals of the AS series are available in a wide range of variants. What they have in common is a focus on a large temperature range.
Aperam BIMETALS “SP series” are thermally the most active bimetal types. They are principally used in case where large deflection is required by a moderate temperature change of a small active length.  
The components used  in the manufacture of bonded thermostat metal strips can also be supplied.
IMPHY SUPRA 50 is a FeNi soft magnetic alloy with saturation induction and high permeability. The high performance level and the chemical purity make this alloy particularly suitable for applications requiring high sensitivity and great accurary. ...
IMPHY SUPRA 40 is an iron-nickel soft magnetic alloys with maximum saturation induction and high permeability with very good stampability.
PERMIMPHY is a crystalline soft magnetic alloy with very high permeability, stress resistant and the lowest magnetic losses. Used, for example for wafer fab  production  equipment shielding. learn more.
PERMIMPHY B is a nickel-iron soft magnetic alloy suitable for laminations used for recording head cores.
PERMIMPHY LS is a FeNi soft magnetic alloy with low decreasing magnetic properties under mechanical stress.
PERMIMPHY T is nickel-iron soft magnetic alloy with very high permeability and high purity dedicated to cores
IMPHY AFK 1 is an iron-cobalt soft magnetic alloy with very high saturation induction and high ductility.    
IMPHY AFK 18E is an iron-cobalt soft magnetic with very high saturation induction, High electrical resistivity and Magnetostriction λs = 25 ppm.
Iron Co soft magnetic alloys with exceptional properties include: a very high saturation induction, a high resistivity, low loss and low coercitive field.  
PHYTHERM 260 is suitable for cookware for induction cooking. The maximum working temperature is controlled by an adapted ferromagnetic alloy with a specific Curie point, the magnetic base stops getting hotter once the Curie Point is reached. These...
INVAR M is an iron-nickel soft magnetic alloy with high permeability and with good resistivity  
PHYTHERM 55 ist eine weichmagnetische Eisen-Nickel-Legierung  
SATIMPHY is an iron-nickel soft magnetic alloy suitable for tape wound cores used in residual current devices, transformers.
CRYOPHY is nickel-iron soft magnetic alloy suitable for magnetic shieldings at cryogenic temperature (typically 4K). It is a patented grade.  
INVAR is a FeNi36 alloy with s a very low coefficient of thermal expansion. The coefficient is of virtually zero at temperatures ranging from cryogenic to ambient. It has a very low coefficient of thermal expansion from -100°C to +200°C).This is a...
IMPHY DILVER is an iron-nickel-cobalt alloy.  This alloy creates an homogeneous oxide layer needed to adhere metal to glass. This is possible thanks to an average CTE close to borosilicate glass).
IMPHY N42 is an iron-nickel controlled expansion alloy suitable to glass sealing, with optimal chemical composition to obtain hermetic seals.  
IMPHY N42 is an iron-nickel controlled expansion alloy especially recommended for etching.  
IMPHY N48 is an iron-nickel controlled expansion alloy suitable to soft glass sealing, with optimal chemical composition to obtain hermetic seals.  
IMPHY N52 is an iron-nickel controlled expansion alloy suitable to soft glass sealing, with optimal chemical composition to obtain hermetic seals.
DURIMPHY is a 250 KSI tensile strength (kilo-pound per square inch) maraging steel. In addition to having a very high yield strength, it offers a range of complementary properties, good formability and weldability, hardening by heat treatment with...
PHYTIME is a 300 KSI tensile strength (kilo-pound per square inch) martensitic alloy ideal for hardening by ageing heat treatment. Its very outstanding mechanical and metallurgical properties make it particularly suitable when resistance to fatigu...
NEW !

Requesting a quote is easy!
To start, just click on the basket icon located at the bottom of each product box.

add cart

Help Center

Our Help Center is a one-stop-shop for all your alloys questions. Download our grade portfolio to see all our available grades per family. Download the Rescal complete catalogue dedicated to wire and ribbons.

Additionnal services

To contact us about product availability and delivery, please choose the most relevant criteria below:
Scroll to top
REQUEST
A QUOTE
0