Stainless Flat Local Offer

Aperam Stainless Services and Solutions France bestaat uit twee entiteiten. Ons Isbergues Service Centre in Noord-Frankrijk distribueert een breed scala aan staalsoorten en -producten, terwijl ons Lusignan Centre gespecialiseerd is in gepolijste en gekleurde afwerkingen. Beide worden bemand door een toegewijd team dat u de beste producten biedt en bovendien de technische ondersteuning die u nodig heeft voor al uw projecten. Dankzij onze gereedschappen voor het kloven, op lengte snijden en polijsten kunnen we een reeks vlakke roestvrijstalen producten op maat leveren aan onze klanten, die actief zijn in de sectoren van chemie, olie, voedingsmiddelen, bouw, verwarming, bouw-, automotive en huishoudelijke apparaten - om er maar een paar te noemen.

Locations

Aperam Stainless Services & Solutions France
Rue Pierre Loti, BP53
62330 Isbergues
T: +33 3 21 63 58 00
E: france.service@aperam.com

Aperam Stainless Services & Solutions France
Special finishes & Coloured products
5, rue de la Roche Grolleau, BP 40020
86600 Lusignan
T: +33 5 49 89 30 77
E: france.service@aperam.com

France Philippe Piers Commercial Director		Building Joëlle Pontet Sales Manager
Special Finishes Sebastien Fayoux Sales

North of France Nicolas Penne Sales		West of France Anita Charpentier Sales
East of France Didier Perin Sales

Grades

Grade designations	Standards			Chemical Compositions							Mechanical properties
	AISI	UNS	EN	C	Si	Mn	Cr	Mo	Ni	Others	R_m	R_p0.2	A%
Aperam 304 (18-9E)	304	S30400	1.4301	0.050	0.40	1.10	18.20		8.05		630	310	54
Aperam 304L (18-9L)	304L	S30403	1.4307	0.025	0.40	1.40	18.20		8.05		630	310	54
Aperam 316L (18-11ML)	316L	S31603	1.4404	0.025	0.40	1.20	18.20	2.10	10.10		610	300	52
K30	430	S43000	1.4016	0.040	0.35	0.30	16.50				500	330	27
K36	436	S43600	1.4526	0.020	0.40	0.25	17.5	1.25		Nb=0.50	510	350	30
K41	441 ⁽¹⁾	S43932/S43940	1.4509	0.015	0.60	0.30	17.80			Ti+Nb=0.65	490	320	30
K44	444	S44400	1.4521	0.015	0.5	0.3	17.70	1.85		Ti+Nb=0.45	530	370	28
K45	445 ⁽¹⁾	S44500	1.4621	0.015	0.25	0.25	20.20			Nb=0.45, Cu=0.45	490	340	31
DX2205	2205	S32205	1.4462	0.020	0.30	1.80	22.80	3.10	5.50	N=0.17	830	620	29
MA2			1.4021	0.22	0.35	0.35	13.30				580	340	25
MA3	420	S42000	1.4028	0.32	0.35	0.30	13.70				610	330	24
MA3M			1.4419	0.38	0.30	0.30	14.00	0.80			680	400	21
MA4			1.4034	0.46	0.40	0.30	13.80				670	390	21
MA5				0.35	0.30	0.30	16.00			N=0.15	680	390	21

(1) Common designation
Searching for other grades, please consult:
See Mill Offer See grade datasheets

Dimensions

Strip - Coil

Finish	Thickness in mm	Min Width in mm	Max Width in mm
2B	0.4 ≤ t < 0.8	15	1250
	0.8 ≤ t <1	15	1500
	1 ≤ t < 8.0	15	2000
2R	0.4 ≤ t < 0.8	15	1250
	0.8 ≤ t <1	15	1500
	1 ≤ t < 2.0	15	2000
HRAP	3.0 ≤ t < 13	50	2000

Sheets - Plates

Finish	Thickness (mm)	Min Width (mm)	Max Width (mm)	Min Length (mm)	Max Length (mm)
2B	0.4 ≤ t < 0.8	290	1250	500	3000
	0.8 ≤ t <1	290	1500	500	15000
	1 ≤ t < 2.5	290	2000	500	15000
2R	0.4 ≤ t < 0.6	290	1250	500	3000
	0.8 ≤ t <2	290	1500	500	15000
	1 ≤ t < 2.5	290	2000	500	15000
HRAP	2.5 ≤ t < 4	290	2000	500	15000
HRAP	4 ≤ t < 13	600	2000	600	15000

Searching for other dimensions and forms, please consult:

See Mill Offer

Surface aspects

Condition	Designation	Description	ASTM	EN10088	Thickness (mm)	Max Width (mm)
HR	HRAP	Hot-rolled, annealed and pickled	N°1	1D
HR	DIN embossed	Hot-rolled with embossed DIN tear-plate pattern, annealed and pickled		1M
CR annealed	HRC	Cold-rolled, rough, matt		2E
CR annealed	2D	Cold-rolled, annealed and pickled, not skinpassed	2D	2D
CR annealed	2B	Cold-rolled, annealed, pickled and skinpassed	2B	2B
CR annealed	2R	Cold-rolled, bright annealed and skinpassed	BA	2R
CR annealed	N°3 / P80D	N°3 polished / Dry polished with 80-grit abrasive belts	N°3	2G	0.8 - 3	≤ 1500
CR annealed	N°4 / P120D-P150D	N°4 polished / Dry polished with 120 grit abrasive belts	N°4	2G	0.6 - 3	≤ 1500
CR annealed	N°5 / P180D-P220D	N°5 polished / Dry polished with 220 grit abrasive belts		2G	0.6 - 3	≤ 1500
CR annealed	N°7 / P320D	N°7 polished / Dry polished with 320-grit abrasive belts		2G	0.6 - 3	≤ 1500
CR annealed	P400D	Dry polished with 400-grit abrasive belts		2G	0.6 - 3	≤ 1500
CR annealed	Duplo P220	Dry polished with 220-grit abrasive belts + brushed with wire rolls		2G	0.6 - 3	≤ 1500
CR annealed	Duplo P320	Dry polished with 320-grit abrasive belts + brushed with wire rolls		2G	0.6 - 3	≤ 1500
CR annealed	Scotch Brite	Lightly brushed with wire rolls		2J	0.6 - 3	≤ 1500
CR annealed	Uginox Patina	Surface coated with a continuous layer of tin in accordance with standard NFA 36332		2S	0.4 - 0.5	≤ 1250
CR annealed	Uginox Top	Matt low-reflectance finish obtained by cold rolling with special rolls	2D	2F	0.4 - 1	≤ 1250
CR annealed	Uginox Bright	2R finish for construction industry	BA	2R	0.8 - 2	≤ 1250
CR annealed	Uginox Mat	2B finish for construction industry	2B	2B	0.8 - 2	≤ 1250
CR Work Hardened	Uginox Leather	Etched textured finish obtained by cold rolling with special rolls		2M	0.8 - 2	≤ 1250
CR annealed	Uginox Linen	Etched linen finish obtained by cold rolling with special rolls, followed by a final anneal		2M	0.8 - 2	≤ 1250
CR annealed	Uginox Squares	Etched chequer patterned finish obtained by cold rolling with special rolls, followed by a final anneal		2M	0.8 - 2	≤ 1250
CR annealed	Mirror Polish Méca 7D	Directional nr 7 mirror polishing.The surface is perfectly reflective, the reflected image is sharp	BA	2P	0.5 - 10	≤ 2000
CR annealed	Mirror Polish Méca 8ND	Undirectional nr 8 mirror polishing (super mirror) without any track of polishing	BA	2P	0.5 - 10	≤ 1500

Searching for other surface finishes, please consult:

See Mill Offer

Certifications

Our Integrated Management System of Quality, Health & Safety, Environnement and Energy is certified according to the following standards :

Certificat ISO 9001

Certificat ISO 14001

Certificat ISO 50001

Certificat OHSAS 18001

Certificate ISO 9001: 2015

Issued by Afnor
Date of grant: 18 May 2016
Expiration date: 18 May 2019
Download

Certificate ISO 50001: 2011

Issued by: Afnor
Date of grant: 07 April 2016
Expiration date: 07 April 2019
Download

Certificate ISO 14001: 2015

Issued by Afnor
Date of grant: 18 May 2016
Expiration date: 18 May 2019
Download

Certificate OHSAS 18001: 2007

Issued by: Afnor
Date of grant: 18 May 2016
Expiration date: 18 May 2019
Download

Find Your Contact

Stainless Flat Local Offer

France/Benelux

Locations

France

Building

Special Finishes

North of France

West of France

East of France

Grade designations

Standards

Chemical Compositions

Mechanical properties

Strip - Coil

Finish

Thickness in mm

Min Width in mm

Max Width in mm

Sheets - Plates

Finish

Thickness (mm)

Min Width (mm)

Max Width (mm)

Min Length (mm)

Max Length (mm)

Condition

Designation

Description

ASTM

EN10088

Thickness (mm)

Max Width (mm)

Other Topics