Standard Finishes

Conditions Designation
Stainless Europe
  Description of surface finish International
equivalents
ASTM EN 10088
HR HRAP   Hot-rolled, anne and pickled N1 1D
DIN Embossed + Hot-rolled with embossed DIN tear-plate Pattern, annealed and pickled   1M
ASTM Embossed + Hot-rolled with embossed ASTM tear-plate Pattern, annealed and picked Pattern B  
CR
ANNEALED
HRC   Cold-rolled, rough, matt   2E
2D   Cold-rolled, annealed and pickled, not skin passed 2D 2D
2B + Cold-rolled, annealed, pickled and skin passed 2B 2B
2R + Cold-rolled, bright-annealed and skin passed BA 2R
CR WORK
HARDENED
Work
hardened(9)
  Cold-rolled without subsequent anneal for various hardness levels TR 2H
CR ANNEALED No.3 or P80D + No. 3 polished / Dry polished with 80-grit abrasive belts No.3 2G
No.4 or P120D-P150D +  No. 4 polished / Dry polished with 120/150 -grit abrasive belts No.4 2G
No.5 or P180D-P220D + No. 5 polished / Dry polished with 180/220 - grit abrasive belts   2G
No.6 or P240D +  No.6 polished / Dry polished with 240 - grit abrasive belts   2G
No.7 or P320D + No. 7 polished / Dry polished with 320 - grit abrasive belts   2G
P400D +  Dry polished with 400 - grit abrasive belts   2G
Duplo P220 + Dry polished with 220 - grit abrasive belts + brushed with wire rolls   2G
Duplo P320   Dry polished with 320 - grit abrasive belts + brushed with wire rolls   2G
Brushed Uginox   Brushed with abrasive belts   2J
Scotch-Brite + Lightly brushed with wire rolls   2J
CR ANNEALED UGINOX Linen + Etched linen finish obtained by cold rolling with special rolls, followed by a final anneal   2M
UGINOX Sand +  Finish obtained by etching with special rolls - -
UGINOX Top +  Matt low-reflectance finish obtained by cold rolling with special rolls 2D 2F
UGINOX Access +  Matt finish obtained by cold rolling with special rolls 2D 2D
UGINOX Mat +  2B finish for construction industry 2B 2B
UGINOX Rolled-On +  Etched matt satiny    
UGINOX Bright +  2R finish for construction industry BA 2R
CR WORK
HARDENED
UGINOX Touch +  Shotpeened finish obtained by cold rolling with special rolls   2M
UGINOX Leather +  Etched textured finish obtained by cold rolling with special rolls   2M
CR ANNEALED UGINOX Tinplated +  Surface coated with a continuous layer oftin in a accordance with standard NFA 36332   2S
CR ANNEALED Aluminised   Surface coated with a continuous layer of aluminium   2S

(9) This table does not take into account the availability of grades or dimensional restrictions: check with your sales contact.